Linksys RT31P2 Installation Guide

Connecting Your VOIPo Adapter (Linksys RT31P2)

To begin using your new VOIPo service, simply connect the VOIPo adapter to your router.  Within 5 minutes the adapter should configure itself and be ready to use.

1)  Phone - Plug your telephone into Phone Port 1 of the adapter.

2)  Internet - Plug the blue ethernet cable into the Internet port of the adapter.  Plug the other end of the ethernet cable into your modem.

3)  Computer - Plug the ethernet cable going to your computer or router (if you have one) into one of the ethernet ports of the adapter.

4)  Power - Plug the AC power adapter into the VOIPo adapter and plug it into an electrical outlet.  Reboot your modem then the adapter, then your router or computer.

Congratulations – Within 3-5 minutes, all lights on the VOIPo Adapter should be lit and you should be able to make and receive calls.