X-lite local sip port

Is there some way for me to setup X-lite so it does not use 5060 as it's local SIP port. You could argue it shouldn't make a difference that my PAP2T is on 5060 and 5061 since it's a different device - but, anyway, I'd like to change it. I've looked through the various menus and can't seem to find where. I'm running version 3.0. I've googled and found a reference from 2005 about how to do it but don't see that option available to me - perhaps they've removed it in my 3.0 version :-(.

You can specify that in the Topology tab. The field is "Manually specify range". Use the same port number in the two fields.

Right click on X-Lite
Choose SIP Account Settings
Choose Properties for the VOIPO entry you've already set up

On the main Account tab that you're presented with, in the DOMAIN attribute box, add :50xx to the end of the entry.

So, mine reads as follows:
east01.voipwelcome.com:5079

When you fire X-Lite, then go to vPanel, it will show as a device on Port 5079

Quote:

---

Originally Posted by sr98user

You can specify that in the Topology tab. The field is "Manually specify range". Use the same port number in the two fields.

---

It wants me to specify a range - if I type in 5062 in both fields it displays an error dialog and says the starting port must be less than the ending port (or some such words) :-(.

Quote:

---

Originally Posted by dbmaven

Right click on X-Lite
Choose SIP Account Settings
Choose Properties for the VOIPO entry you've already set up

On the main Account tab that you're presented with, in the DOMAIN attribute box, add :50xx to the end of the entry.

So, mine reads as follows:
east01.voipwelcome.com:5079

When you fire X-Lite, then go to vPanel, it will show as a device on Port 5079

---

Wouldn't east01.voipwelcome.com:5079 specify the port to be used on the server side? I'm interested in specifying a different port from the default 5060 on the client side. Or, am I just confused?

Quote:

---

Originally Posted by Russell

Wouldn't east01.voipwelcome.com:5079 specify the port to be used on the server side? I'm interested in specifying a different port from the default 5060 on the client side. Or, am I just confused?

---

Make sure you check with support and find out which server to use.

Quote:

---

Originally Posted by Xponder1

Make sure you check with support and find out which server to use.

---

Unfortunately, for this poor sap, the only way to find out is to check with support :-(.

For those of you using 3.0 of X-Lite. Can you add a second sip provider? My Add button is disabled - I figured this being the free version they just allow one.

Quote:

---

Originally Posted by Russell

It wants me to specify a range - if I type in 5062 in both fields it displays an error dialog and says the starting port must be less than the ending port (or some such words) :-(.

---

My bad. I think I used 6061 and 6062 in the two field. It will select the first one.

See also http://forums.voipo.com/showthread.php?t=1334&page=2

Quote:

---

Originally Posted by Russell

Unfortunately, for this poor sap, the only way to find out is to check with support :-(.

---

If you can see the NAT entries of the your router, then you can find out your server.