No devices registered (502)

[hines86fan]

I'm still suffering from the inability to register after the upgrade. I moved the ATA in front of the router. Then tech support called, and we went through and verified the settings for firmware path and config path, and various other settings. But, alas, no joy was had.

[1bird2]

Based on most, if not all, of the posts -- I see that most are able to get the upgrade. My ATA will not even upgrade. In fact, the support guy I talked with today was suprised at the version of firmware I had, 1.0.0.76. I guess I have some really old version/device, which is weird as I really have not had any issues since getting the 502 ATA, until today of course.

I hope I am contacted soon to get this resolved.

-bird

[myvoip07]

Based on most, if not all, of the posts -- I see that most are able to get the upgrade. My ATA will not even upgrade. In fact, the support guy I talked with today was suprised at the version of firmware I had, 1.0.0.76. I guess I have some really old version/device, which is weird as I really have not had any issues since getting the 502 ATA, until today of course.

I hope I am contacted soon to get this resolved.

-bird

This is how it show after upgrade to 1.0.1.21. What does your shows?

Software Version: Program-- 1.0.1.21 Bootloader-- 1.0.0.9 Core-- 1.0.0.25 Base-- 1.0.0.76

Also i doubt there was 1.0.0.76 firmware version before as i couldn't find it. But i may be wrong.

[hines86fan]

This is how it show after upgrade to 1.0.1.21. What does your shows?

Software Version: Program-- 1.0.1.21 Bootloader-- 1.0.0.9 Core-- 1.0.0.25 Base-- 1.0.0.76

Also i doubt there was 1.0.0.76 firmware version before as i couldn't find it. But i may be wrong.

Same versions here.