How to access to RT31P2?

[voip123]

Hi folks,

Got a question:
I got the Linksys RT31P2. My Setup:
Yahoo DSL Modem -> Linksys WRT54GS Router -> Linksys RT31P2

How do I access to it?

Thanks.

[chpalmer]

Go to the dhcp users list of your Linksys router and find it there...


192.168.15.1 should be the RT31P2

[voip123]

Hi chpalmer,

That is my problem. I tried that one already. Actually I can see a dynamic ip address 192.168.1.102 from DHCP client table. I have other 6 PCs and printer server. They all are static ip addresses. The only DHCP one is the phone adapter. I tried to access http://192.168.1.102. It didn't bring up anything.

Have no ideas what is going one.

Thanks for the info.

[Russell]

Go to the dhcp users list of your Linksys router and find it there...


192.168.15.1 should be the RT31P2

That's the LAN side address. If you plug a computer into the LAN side you should be able to access it at that address. Since the poster is going via the WAN "remote administration: needs to be enabled. Try port 9999 at that DHCP assigned address you mention (http://192.168.1.102:9999).

[chpalmer]

Forgot to mention the lan thing


Mine is port 8080 instead of 9999... on the WAN side.

[voip123]

That's the LAN side address. If you plug a computer into the LAN side you should be able to access it at that address. Since the poster is going via the WAN "remote administration: needs to be enabled. Try port 9999 at that DHCP assigned address you mention (http://192.168.1.102:9999).

Hi Russell,

You are the MAN!

Thank you!!!

[voip123]

Hi Russell,

Right now, both of the Remote Upgrade and Remote and Administration are Enable. I'd like to disable them. Is it OK?

Can I change the default password to something else?

Thanks.

[VOIPoTim]

If you disable them, support won't be able to assist with troubleshooting since we won't have remote access. We recommend keeping them enabled.

[chpalmer]

If you disable them- you wont be able to access it via the wan port either.

Since your behind a router no one else can get to it anyway. Dont worry.

[voip123]

Thank you Tim and Chaplmer. The problem is solved.