Quote Originally Posted by ctaranto View Post
I'm guessing (and purely a guess) that coming in the LAN of the RT is different, either NAT, Firewall, or otherwise, than coming in through the WAN. Once in the LAN of the RT, going out the WAN is transparent. I am knowledgeable about networking, but by no means a pro. A side benefit of doing it this way is one can "manage" the RT through a normal IP address since it's on the same subnet.

My RT is running 1.25.00.
I'll have to check and see what version my RT is running. I know both of the ones VoIPo sent me are running the same version and when I checked there was a later version of the firmware out there.

I'm able to manage my RT that is plugged into my WAN port today. I just go out to http://192.168.15.2:999 (or is it 4 9's?) and it brings up the login popup and then I'm in.

I'll let you know version and if I get it to work.

Since it is not an everyday thing for me, I may not notice if it doesn't fall off. If it works, even tho it is not "clean", I'd be able to live with it.