-
Re: Provided ATA and Soft/SIP phone on same network?
I’d expect the multiple IP route to work flawlessly—as this really is the ideal scenario. That said though, if possible, you might want to replace the 2Wire router with something decent.
Last edited by Bink; 01-26-2012 at 03:59 PM.
-
Re: Provided ATA and Soft/SIP phone on same network?
Follow up: I added a Panasonic SIP corded/cordless combo behind the router, right along and in the same
subnet, no port forwarding. This is using Uverse RG. BTW, the only way to "replace" the router with Uverse is to place a router in DMZ hooked to their RG device, as it contains the vdsl modem component. Anyway, happy to report all appears to work well. Still have plans to add a static ip maybe...will see if any issues crop up.
I can also say the Panasonic KX-TGP550 and 551 work quite well. Have it registered with VOIPo and CallCentric too.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks