Quote Originally Posted by MisterEd View Post
Here is even an easier test:

Make sure your VOIPO is set back to DHCP on the WAN side.
Power off your cable/dsl modem.
REMOVE your WRT.

Plug the cable that went into your WRT into the VOIPO WAN port. DON'T ATTACH ANYTHING ELSE.

All you have now is CABLE MODEM into VOIPO WAN port. No computers, no phones.

Power up CABLE MODEM
Power up VOIPO

Does your phone work?

If not, bad Voipo
If so misconfigured WRT router

(This is all assuming you didn't mess up the WAN settings on the Voipo device).
I've been talking with VOIPo support about this. I think it's a bad RT. Earlier today I put the RT directly connected to the cable modem (I first made the WAN on the RT DHCP so the cable modem could assign it a public IP). I unplugged both, plugged in the cable modem, waited for the 4 lights, plugged in the VOIPo. The Internet light on the VOIPo blinked like crazy (which is normal). But never got a Phone light to light up. Then after waiting for 30 mins, I tried to get back into the RT admin screen, and the password was changed and I can no longer get in. I then tried the Reset button for 30 seconds, and it didn't work. Connecting an XP laptop to the RT, getting a 192.168.15.100 IP, I could see the internet fine.

Thanks to all of you for the continued suggestions.

-Craig