What happens exactly? Your answering machine picks up even before that 100ms duration is over?
What happens exactly? Your answering machine picks up even before that 100ms duration is over?
VOIPoJustin, take a look at the ticket(BLE-267247)
even with "Loop Current Disconnect" enabled and "Current disconnect duration" of 200,
the answering machine is still able to record the fast busy tone (just a little bit shorter) after the caller hangs up
perhaps I can try a longer duration for "Current disconnect duration" - I;ve not tried anything longer than 200 ms
my wish list:
- Intelligent Call Forwarding that detects the incoming call originated from the "forwarded" phone and rings the original destination instead
Call History that makes use of CallerID/Custom CallerID+Location. Call History only shows Custom CallerId+Loc. No CNAM look up; Albeitly,it's a step in the right direction!
- Scheduled sim. ring with a twist (see wish #1)
I'd recommend going longer. The answering machine 'hangs up' when it detects the loop disconnect, and a longer disconnect would be easier to detect. FWIW, choosing something like 1 second is closer to a 'hook flash'; when I've played with the feature on my PAP, I found 500 - 750ms to work well.
Bookmarks