DNS Settings

[burris]

PAP2T is obvious, but where do we find the field in the 502 in a non-router config?

[VOIPoTim]

PAP2T is obvious, but where do we find the field in the 502 in a non-router config?

It's mixed in with the static stuff under Basic Settings but appears to use it so we were confused too.

The main one is "Preferred DNS".

For good measure, we're populating the "DNS Server 1" and "DNS Server 2" as well.

For provisioned clients that need to use something specific due to their network setup or ISP, we can override it to whatever they need.

[burris]

Are you going to leave the register time still set to 1 minute for now?

[VOIPoTim]

Are you going to leave the register time still set to 1 minute for now?

For now, yeah. It's not causing any issues so we'll leave it for the time being.

[burris]

Tim..

Another thought after considering the convoluted settings arena on the 502.

Originally the provisioned box had no DNS IP in the field and had the DNS mode in the FXS port tab set to A Record...after a bit, you changed to to SRV mode.

Now after entering an actual DNS IP, assuming the box actually processes it, should we consider which of the 3 DNS mode choices should be set for each line?